Videx VX2200 Guía para resolver problemas descargar pdf (Pagina 37)

PAGE 37 of 60 VX2200 TECHNICAL MANUAL VER1.4

Art.3376, 3476 VIDEOPHONE

Operation

In stand-by mode:

The unit is ready to accept all incoming calls;

To answer a call and open the door:

Pick the handset up and speak with the visitor (or concierge); press the “Key” button (if it is an external call)

to open the door (an acoustic signal will be emitted and the door will open for the time programmed) or

replace the handset to end the conversation; if the call is local (local bell), the call tone will have a different

tonality from the main one.

To call the Concierge Unit (if present and only VX2210-1 version):

With the handset replaced, press the “Key” button and wait: the call is booked on the concierge and will be

answered at the discretion of the operator;

To activate the services relevant to ●●, S

& S

push buttons:

Press the “●●”, “S

” or “S

” push button depending on the service you need to be activated (for the use of

these services it is necessary to make the appropriate connections).

To operate the recall:

Pick up the handset then quickly press the “●” push button as many times as the ID value (1..10) of the

outdoor station to switch on (for example if the ID=3 press the button 3 times). After about 1s the videophone

will be connected to the selected outdoor station. An acoustic tone confirms each time the “●” button is

pressed. This function can be used only if the push button is configured as a recall button; the concierge, if

present, must be in OFF mode. In case of multilevel systems, the recall facility will work with the outdoor

station of the main level (Speech will also be opened).

To send the alarm signal to the concierge:

Press the “●” push button. This function can be used only if this push button isn’t configured as a recall

button.

To activate the privacy mode (Art.3376 only)

Press the push button marked as : the red “privacy on” LED will switch on. To disable the privacy mode

before the configured time expires, press the same push button again.

5 Way Dip-Switch

(Default settings above)

When connecting two or three videophones

in series within an apartment without the

use of the video splitter (Art.316 or Art.894),

dip-switches 3 & 5 should only be switch on

at the end of line videophone.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Sin comentarios

Videx VX2200 Guía para resolver problemas Pagina 37