Videx VX2200 Guía para resolver problemas Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
PAGE 19 of 60 VX2200 TECHNICAL MANUAL VER1.4
Operation
In stand-by mode:
The phones connected to the 2204/2204N are physically disconnected from the BUS line.
During the call:
- In case of a call to a phone linked to the 2204/2204N, the BUS line will be activated for the selected
phone only (A green active LED will illuminate next to the active apartment on the 2204N PCB).
- If there are problems with the 2204/2204N BUS outputs (connected peripheral outputs broken or in
short), all the calls addressed towards those outputs from the outdoor station or from the concierge will
be signalled by visual and acoustic error messages.
NOTE: When using 2204 it is not possible to connect other phones, accessories or push buttons to activate
the local bell facility. (They can be connected to the 2204N)
Programming
The 2204/2204N programming consists of the configuration of the internal 6 way Dip-switch, used to specify
the ID. address of the 4 phones linked to its outputs (See the following table). Dip-Switches must be set
before power up and must match the table below (i.e. The phone with ID 7 must be connected to output 3 of
the 2204/2204N addressed as 1).
Addresses of: Addresses of: Addresses of:
Connected Intercoms Connected Intercoms Connected Intercoms
2204 no.
DIP-SW
Settings
L1 L2 L3 L4
2204 No.
DIP-SW
Settings
L1 L2 L3 L4
2204 No.
DIP-SW
Settings
L1 L2 L3 L4
0
1 2 3 4
16
65 66 67 68 32
129 130 131 132
1
5 6 7 8
17
69 70 71 72 33
133 134 135 136
2
9 10 11 12
18
73 74 75 76 34
137 138 139 140
3
13 14 15 16
19
77 78 79 80 35
141 142 143 144
4
17 18 19 20
20
81 82 83 84 36
145 146 147 148
5
21 22 23 24
21
85 86 87 88 37
149 150 151 152
6
25 26 27 28
22
89 90 91 92 38
153 154 155 156
7
29 30 31 32
23
93 94 95 96 39
157 158 159 160
8
33 34 35 36
24
97 98 99 100 40
161 162 163 164
9
37 38 39 40
25
101 102 103 104 41
165 166 167 168
10
41 42 43 44
26
105 106 107 108 42
169 170 171 172
11
45 46 47 48
27
109 110 111 112 43
173 174 175 176
12
49 50 51 52
28
113 114 115 116 44
177 178 179 180
13
53 54 55 56
29
117 118 119 120
14
57 58 59 60
30
121 122 123 124
15
61 62 63 64
31
125 126 127 128
Technical specifications
Number of outputs : 4
Addressing range : from 0 to 44
Working temperature : -10 +50 C°
12V output current max. : 200mA
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Comentarios a estos manuales

Sin comentarios